Environ offers workplace lux level measurement across factories and industrial facilities in Gujarat, using calibrated lux meters at task locations and benchmarking results against IS 6665, the Bureau of Indian Standards code of practice for industrial lighting.
Light intensity (lux) measurement assesses workplace illumination levels at specified work locations, compared against the recommended illumination levels for the type of work being performed, as set out in IS 6665, the Bureau of Indian Standards' code of practice for industrial lighting.
Adequate workplace lighting is both a safety consideration (reducing accident risk from poor visibility) and a factor in the Factories Act's provisions on working conditions. Illumination requirements vary significantly by task — fine assembly or inspection work needs substantially higher lux levels than general material handling areas.
Illumination is measured at task-relevant points across a facility, and the results are benchmarked against IS 6665.
A factory illumination survey checks whether lighting suits the task: fine assembly and inspection need higher lux than general handling areas. The results show where lighting upgrades should be prioritised and give you a record for occupational health and Factories Act compliance. Because the measurement is quick, many sites combine it with workplace air quality monitoring and noise level monitoring in a single visit. See the wider testing menu under air and emission testing. Send an enquiry with your plant layout to get a lux survey scope.
A step-by-step look at how Light Intensity (Lux) Measurement is typically carried out.
Identifying task areas where illumination needs verification against IS 6665.
Measuring illumination levels at each identified work area using a calibrated lux meter.
Comparing measured lux levels against the IS 6665 recommended values for that task type.
Flagging any work areas falling short of the recommended illumination level.
Delivering an area-wise light intensity measurement report.
Need help?
+91-72029-26676Talk to Environ's team about approvals, NABL-accredited testing, ETP/STP design or ESG reporting, and we'll guide you to the right service.
Call Us Anytime 24/7
+91-72029-26676The same in-house team delivering Light Intensity (Lux) Measurement also handles every other environmental service we offer, backed by a NABL-accredited laboratory so testing is never outsourced to a third party. We work as a technical support partner to companies navigating Gujarat Pollution Control Board scrutiny, and our founder is empanelled as a Schedule II Environmental Auditor for the statutory audits certain industry categories must undergo. Our track record in groundwater permissions includes over 100 CGWA licenses secured across 17+ districts in Gujarat and neighbouring regions - because approvals, testing, compliance filing, and treatment plant design-build all sit with one team, findings from one stage inform the next instead of being reconstructed by a different vendor each time.
A quick look at the scale of environmental compliance work Environ India has delivered across Gujarat.
Happy customers
Annual Turnover
Project Completed
Years Of Experience
Experience Staff
Clients working with us on Light Intensity (Lux) Measurement and our other environmental services share what it's like working with our engineers, lab team, and consultants.
A factory chimney may appear to be operating normally, but the gases released through it can contain pollutants that are...
A business may complete its Extended Producer Responsibility (EPR) registration, arrange plastic waste recycling, and pu...
Your Effluent Treatment Plant (ETP) may be running every day, with pumps operating, blowers functioning, and wastewater ...
A look at the environmental engineering and treatment projects we have delivered on the ground.